Steel Plasterers Beads
Our comprehensive range of Steel Plasterers Beads are precision engineered and simple to use. Fixing by nail or plaster dab is straightforward and fast, generation arises, edges, corners and joints that are easy to form and resistant to chipping, cracking and impact damage.
Material
Galvanised steel to BSEN 10327-DX51D+Z275 and Austenitic stainless steel to BSEN 10088-2-1.4301 for external applications
Specification
All metal beads comply with the British Standards. Beads for Internal Plastering and Drylining BS6452 Part 1:1984
Architrave Bead
A bead, available both with or with out a flange, which may be used to decorative effect where shadow lines are aesthetically desirable. Typical applications include the creation of clean divisions between varying wall finished, at wall and ceiling abutments, door and window reveals and other built in joinery features.
Download the Architrave Bead data sheet here 32.47 kb
Depth Gauge Bead
Available in 6mm and 10mm profiles, Depth Gauge Bead provide a quick and accurate means of ensuring consistent, minimum plaster depths as plaster is simply ´rules off´ to leave the required thickness. Depth Gauge Bead may also be used to separate plaster areas and as a skirting bead.
Download the Depth Gauge Bead data sheet here 32.47kb
Dry Wall Angle Bead
Rigid but lightweight, the drywall bead is designed for standard single plasterwork. The internal angle of the Dry Wall bead is accurately manufactured to 80° providing a plaster depth of 6mm.
Download the Dry Wall Angle Bead data sheet here 142.62kb
Dry Wall Stop Bead
Designed for thin coat edge protection at openings and for providing abutments of plastered areas to other wall finishes. Light but extremely rigid, the scalloped edge provides for efficient keying and excellent finish.
Download the Dry Wall Stop Bead data sheet here 23.36kb
Dry Wall Thin Coat Bead
The Dry Wall Thin Coat bead incorporates a new perforation pattern for improved wing flexibility. This, together with the revised 85° angle, allows greater scope for on-site adjustments and setting.
Download the Dry Wall Thin Coat Bead data sheet here 146.63kb
Micro Angle Bead
A popular thin coat bead with fine mesh wings, designed for single coat plaster applications including dry-wall, block and slab work. Provides excellent adhesion and good reinforcement for the arris.
Download the Micro Angle Bead data sheet here 146.64kb
Movement Bead
Allows for movement between adjoining surface finishes resulting from differential expansion or settlement. Allowable movement is 3mm(+/-). Galvanised for internal applications, Stainless Steel for external use and high condensation and moisture areas.
Download the Movement Bead data sheet here 35.19kb
PVC Nose Punched Wing
A rigid and durable profile with the added benefit of a PVC-U nose which provides excellent edge protection for vulnerable corners where a high quality finish needs to be maintained despite heavy wear and repeated mechanical contact.
Download the PVC Nose Punched Wing data sheet here 35.2kb
Plaster Stop Bead
Provides clean, neat edges to two coat plaster/render work at openings or abutments onto other wall surfaces or ceiling finishes. Galvanised for internal applications, Stainless Steel for external use and high condensation and moisture areas.
Download the Plaster Stop Bead data sheet here 35.18kb
Plasterboard Edging Bead
Used to reinforce plasterboard edges with the perforated flange fixed flush to the board face prior to the final skim coat. The bead may also be fixed with the flange flush to the inner surface to the board for use in projection wall panelling.
Download the Plasterboard Edging Bead data sheet here 23.36kb
Render Stop Bead
Used to obtain a neat, bell cast lower edge to external render finishes. This profile has excellent resistance qualities and gives good protection to masonry against run-off water.
Download the Render Stop Bead data sheet here 24.45kb
Standard Angle Bead
Designed for two and three coat applications, Standard Angle Bead forms strong and accurate corners resistant to chipping and cracking. Available in Galvanised Steel for internal applications and available in Stainless Steel for external use and high condensation and moisture areas.
Download the Standard Angle Bead data sheet here 24.46kb
Supersave Angle Bead
A strong, resilient and cost effective bead designed for two coat applications. Supasave generates a true, straight corner that provides strength and protection from everyday knocks.
Download the Supasave Angle Bead data sheet here 32.46kb