Internal Wall Lintels

Lintels

Image of an internal wall lintel

Catnic lintels for internal partitions and loadbearing walls are available in either corrugated, channel or box section depending on load and opening.

Typical applications:

CN92 and CN102

Suitable for nominal domestic loading

CN100

As above plus:

Suitable for masonry and timber floor loads.

Note: 1800 and 2100mm lengths are not suitable for floor loads.

CN5X and CN6X

As above plus:

Universal application caters for all loading conditions
Direct floor or roof load
Supports concrete floor loads
Supports point loads eg. Steel beams, etc
Optional 4 course profile for high loads at extended lengths

Image of an internal wall lintel

CN56X and CN66X

As above plus:

Suitable for 140mm and 150mm blockwork

Corrugated and channel lintels

Offer a cost effective solution for lightweight and standard duty loads. Use corrugated galvanised steel lintels for lightweight structures and channel section lintels for masonry and timber floors (lintel CN100 has an additional polyester powder coating as standard)

Box profiles

Sized to suit brick or block course heights. Use box profiles for heavier loads and wider openings, manufactured from galvanised steel with additional polyester powder coating.